The Gas Cap gas cap you need is a Kuryakyn vented 8309
I modified the cap to fit into most metric bikes with a 1.565" tank opening. The only way to mount the cap securely is to epoxy the mounting rim of the cap into the tank. For a permanent mount, I suggest using JB Weld on the underside of the cap where it makes contact with the raised lip of the tank opening. For a less than permanent installation, I suggest 3M 8001 Weather Strip Adhesive, but it much harder to work with. It is soft and may drip into your tank unless you let it dry to a tacky texture before installation. I am still looking into additional adhesives.
|
 |
The removable cap is has a threaded insert using left handed threads that requires a key (included). The Plastic Spanner Key is about the only way to remove it to fill the tank with gas. |
 |
The beauty of this cap is it's low profile, aircraft design and it's lockable filler insert. |
 |
|